S-Style C
CUBE
CUBE BNZ11

S-Style C

Code No. 80110-AN105

*Discontinued.

Application

Engine CR14DE
Model Year 02/10 - 08/11
Remarks 4WD

Specification

  FRONT REAR
Damping force adjustment - -
Base valve - -
Height adjustable lower bracket -
Upper mount Rubber Stock
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Impossible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)
- -
Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 629 - 651 ~ 592 651 ~ 592
Against stock -22 - 0 ~ -59 0 ~ -59
REAR Ride height *1 - 616 622 ~ 590 622 ~ 590
Against stock - -40 -34 ~ -66 -34 ~ -66

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 39 ( 4 ) 47 ( 4.8 )
Free height (mm) 220 -
Spring type Straight Barrel type Special shape
Recommended range to change spring rate N/mm(kgf/mm) +20 ( 2 ) -

Specification of damper

  F R
Damping force (Rebound/Damping)N* 559 / 118 265 / 147
Default position of dial - -
Remaining damper stroke (Rebound/Damping)mm - -

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
331 - 341 301 372 372
Spring
Set length(mm)
194 - 189 199 - - - -
Length to ride hight
adjuster (mm)
35 - 50 0 38 46 50 21
Lever ratio 1.05 1.50(spg) , 1.00(dmp)

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information

  F R
Vehicle weight kg 673 (660) 488 (470)
Tire size (Air pressure) kPa 175 / 65 - 14 ( 230 ) 175 / 65 - 14 ( 210 )
Wheel size 5 JJ × 14 off 45 5 JJ × 14 off 45
Alignment
(Toe/Camber)
Test data 0 mm / -0°06' in 6 mm / -0°50'
Standard value in 2 ~ 0 mm / -0°50' ~ 0°40' in 8 ~ 0 mm / -1°34' ~ 0°04'

* Test data at HKS.


Parts List   * It may be changed without prior notice.

 


Point

 
 
 
 
 
 
 
 
 
 
 



[ CLOSE ]

 

 

HKS