S-style L 2018 ELYSION
Explanation of the product Application chart

ELYSION RR1,RR3
S-style L 2018 Code No. 80130-AH203
 
 


▲The above photo is an item for RB1.

Pre-load Valve System & M4P Deliver Ultimate Elasticity Ideal for "Low-stance Enthusiasts"



Application   Specification
Engine K24A,J30A
Model Year 04/05 - 13/10
Remarks  
 
  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Rubber Rubber (Stock)
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Impossible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)
- -


Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 693 - 734 ~ 650 734 ~ 650
Against stock -41 - 0 ~ -84 0 ~ -84
REAR Ride height *1 696 - 724 ~ 668 724 ~ 668
Against stock -28 - 0 ~ -56 0 ~ -56
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information
Spring of Full Kit
  F R
Spring rate N/mm(kgf/mm) 78 ( 8 ) 95 ( 9.7 )
Free height (mm) 250 -
Spring type Straight Special shape
Recommended range to change spring rate N/mm(kgf/mm) ±10 ( 1 ) -
Specification of damper
  F R
Damping force (Rebound/Damping)N* 976 /378 687 / 280
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 66 / 50 89 / 80
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
320 - 344 301 366 - 381 359
Spring
Set length(mm)
243 - 241 252 - - - -
Length to ride hight
adjuster (mm)
60 - 86 32 29 - 43 15
Lever ratio 1.56 2.00 (SPG) 1.47 (DAMP)
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.


Test vehicle information
  F R
Vehicle weight kg 1002 825
Tire size (Air pressure) kPa 215 / 60 - 17 (230) 215 / 60 - 17 (230)
Wheel size 6.5JJ × 17 off55 6.5JJ × 17 off55
Alignment
(Toe/Camber)
Test data 0mm / -1°00' in4.0mm / -2°00'
Standard value 0±2mm / 0°00'±0°45' in2±2mm / -0°30'±0°45'
* Test data at HKS.


Parts List * It may be changed without prior notice.


Point
 
・ Resetting of appropriate stroke and damping force was performed for superfine ride quality.
・ The bracket and cylinder are PNE coated for better durability. Dust boots were redesigned to be more durable.
・ The rugged vibration was eliminated to provide a driver mild ride feeling as well as passengers.
・ Appropriate setting enables to deliver agile handling and eliminate unsteadiness under high speed driving so driving is more enjoyable.
・ Do not shorten the front case length less than 301mm since the vehicle body may come in contact with the upper arm at full bump.
 
※The vehicle height may not become the height shown in the vehicle information. It may vary depending on the vehicle’s individual difference.
 
 
 


[ CLOSE ]

 

 

HKS