Code No. 80300-AN021
The long-awaited HIPERMAX S for the ever-popular, ultimate station wagon 'Stagea' is finally here!
Available for order for a limited time only.
Order Period: From July 25, 2025 Until October 24, 2025
Pre-load Valve System
Equipped with a Pre-load Valve System.
This system reduces damping force at high speeds to suppress unnecessary movements,
providing a comfortable ride without harsh jolts.
Wide-range damping adjustment system
By evolving the shape of the jet needle, the range of damping force adjustment has been expanded compared to previous models.
This allows compatibility with a wide variety of driving conditions.
3-year / 60,000 km high-durability specification
Thanks to advanced tribology, we have achieved both high durability and reduced friction.
Ride comfort and handling have been further refined.
Application
Engine | RB25DET |
---|---|
Model Year | 96/09 - 01/10 |
Remarks | 4WD, AT Only *Not compatible with RWD models. |
Specification
FRONT | REAR | |
---|---|---|
Damping force adjustment | 30 steps | 30 steps |
Base valve | - | - |
Height adjustable lower bracket | 〇 | 〇 |
Upper mount | Rubber | Rubber |
Inverted/Normal type | Normal | Normal |
Damper/Spring layout | Coilover | Coilover |
Spring rate change at factory | Possible | Possible |
Damping force adjustment with wire | - | - |
Helper spring (Spring rate N/mm) | 〇 (19.8) | 〇 (19.8) |
Factory *2 | Test data | Adjustable range High - Low *3 |
Drivable range High - Low *4 |
||
---|---|---|---|---|---|
FRONT | Ride height *1 | 639 | ← | 669 ~ 603 | 669 ~ 603 |
Against stock | -45 | ← | -15 ~ -81 | -15 ~ -81 | |
REAR | Ride height *1 | 640 | ← | 663 ~ 604 | 663 ~ 604 |
Against stock | -26 | ← | -3 ~ -62 | -3 ~ -62 |
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.
Kit information
Spring of Full Kit
F | R | |
---|---|---|
Spring rate N/mm(kgf/mm) | 88 ( 9.0 ) | 78 ( 8.0 ) |
Free height (mm) | 200 | 250 |
Spring type | Straight | Straight |
Recommended range to change spring rate N/mm(kgf/mm) | ±20 ( 2 ) | ±10 ( 1 ) |
Specification of damper
F | R | |
---|---|---|
Damping force (Rebound/Damping)N* | 883 / 280 | 427 / 334 |
Default position of dial | 15 | 15 |
Remaining damper stroke (Rebound/Damping)mm | 64 / 52 | 77 / 92 |
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
F | R | |||||||
---|---|---|---|---|---|---|---|---|
Default | Test | Drivable limit High * |
Drivable limit Low * |
Default | Test | Drivable limit High * |
Drivable limit Low * |
|
Length of case (mm) |
275 | ← | 302 | 253 | 488 | ← | 510 | 460 |
Spring Set length(mm) |
244 | ← | 244 | 255 | 318 | ← | 318 | 325 |
Length to ride hight adjuster (mm) |
33 | ← | 60 | 0 | 125 | ← | 147 | 90 |
Lever ratio | 1.10 | 1.03 |
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.
Test vehicle information
F | R | ||
---|---|---|---|
Vehicle weight kg | - (900) | - (790) | |
Tire size (Air pressure) kPa | 215 / 40 - 18 ( 230 ) | 215 / 40 - 18 ( 230 ) | |
Wheel size | 8.0 JJ × 18 inset 25 | 8.0 JJ × 18 inset 25 | |
Alignment (Toe/Camber) |
Test data | in 0 mm / -1°55' | in 3 mm / -2°34' |
Standard value | in 1 ± 1 mm / 0°50' ± 0°45' | in 1.3 ± 2.6 mm / -0°55' ± 0°30' |
* Test data at HKS.
Parts List * It may be changed without prior notice.
[ CLOSE ]