Code No. 11003-AN013
HKS is challenging for the high performance concept of HKS R35 GT series. And we have set the goal of 1000 horse power with GT1000! For the extream power and performance, the GT800 design of "symmetrical layout" has succeeded to the new GT1000.
Power | Torque | Boost | |
GT1000 Racing SPEC | 1012ps/7450rpm | 120.7kg-m/3990rpm | 2000kPa |
GT800+ Racing SPEC | 859ps/6820rpm | 103.9kg-m/3950rpm | 165-155kPa |
GT800 Racing SPEC | 804ps/6790rpm | 98.7kg-m/3850rpm | 165-155kPa |
Boost pressure and output | |
100kPa | 730ps |
120kPa | 840ps |
160kPa | 930ps |
200kPa | 1000ps |
* The output data is test result of HKS chassis dynamometer. The results may vary for other device.
●Parts for GT1000 | |
Exhaust Manifold | Heat resistance cast about φ52 pipe |
Turbine | GT II 7867 Heat resistance cast (T/HSG) |
Wastegate | HKS GT II φ50 |
Front Pipe | SUS304 φ70→φ75 |
Suction Pipe | AL buff φ70 |
Other short parts |
* We suggest to use HKS Racing Suction Reloaded
MODEL | Control device |
Power per turbine |
Compressor wheel | Compressor housing | Turbine wheel | Exhaust housing | ||||||||
Trim | Inlet (mm) |
Outlet (mm) |
Inlet (mm) |
Outlet (mm) |
A/R | Trim | Inlet (mm) |
Outlet (mm) |
Inlet flange |
Outlet flange |
A/R | |||
GT II 7867/ GT II 7867R |
Wastegate | 550 | 63 | 62.0 | 78.0 | 0.74 | R35 only |
0.74 | 77 | 67.5 | 59.3 | R35 only |
R35 only |
0.66 |
[ CLOSE ]