GT5565_BB FULL TURBINE KIT
GT-R
Explanation of the product Application chart
GT-R R35

GT5565_BB FULL TURBINE KIT

Code No. 11003-AN019

 

 

 

 

FULL TURBINE KIT GT5565_BB  for R35 GT-R

 

 

SPL FULL TURBINE KIT without the TURBINE SUCTION KIT

 

 

 

 

 

■Features

  • This product is a kit based on the SPECIAL FULL TURBINE KIT GT5565_BB (Part No. 11003-AN020), excluding the TURBINE SUCTION KIT (Part No. 14021-A001).
  • It inherits the signature “symmetrical layout” characteristic of the R35 full turbine kit, and has been newly configured with GT5565_BB specifications.
  • Minimal vehicle modifications are required, and it supports high-power setups exceeding 1000ps.
  • At a boost pressure of 200kPa, it delivers a maximum torque of 1380Nm (140kgf·m) at 5000rpm, and a maximum output of 827kW (1215ps) at 6800rpm.
  • The addition of a ported shroud helps to suppress surging, significantly improving throttle response and enhancing accelerator control during circuit driving.
  • The exhaust manifold and turbo housing are made from heat-resistant cast steel, ensuring excellent durability even under high-temperature, high-vibration conditions.

 

 

Point!

In the GT1000 and GT1000+ kits, the system was designed for use in combination with the Racing Suction Kit (Part No. 70020-AN107). However, for the Full Turbine Kit, a dedicated Suction Kit (Part No. 14021-AN001) is now offered as a separate option.

Note: The Full Turbine Kit does not include the Φ80–Φ70 air flow adapter.
If you plan to use it in combination with the Racing Suction Kit (70020-AN107), please make sure to purchase two units of the air flow adapter separately:
・Product Name: Pipe Suction
・Part No.: G17811-N49080

 

 

■Kit Components

 

●Component Parts
Turbine GT5565_BB／ GT5565R_BB
Exhaust Manifold Heat-resistant cast steel exhaust manifold with an outlet inner diameter of 47mm
Wastegate GTII 50mm
Front Pipe SUS304 D70mm-D75mm
Suction Pipe Polished aluminum 70mm suction pipe
Note: Air flow adapter is not included.
Chamber Pipe Cast aluminum D60mm-D70mm
Others Replacement Engine Mount (Right Side)

 

 

■Precautions

  • This product does not include the TURBINE SUCTION KIT.
    If required, please purchase it separately as TURBINE SUCTION KIT (Part No. 14021-AN001) or choose the SPECIAL FULL TURBINE KIT (Part No. 11003-AN020), which includes it.
  • Engine removal is required for installation.
  • The following components are not included in the kit: Fuel pump, injectors, F-CON, EVC, and engine parts.
  • The factory-set boost pressure of the wastegate is approximately 90–100kPa.
  • Modification of the stock water pipe is necessary.
  • Modification of the OEM turbocharger heat insulator is required.
  • This is a competition-use-only product. We do not provide any warranty for engine, transmission, or other damage resulting from the installation or use of this product.
  • As this product is designed to remove the catalytic converter, the vehicle will no longer comply with Japanese road safety regulations and cannot be driven on public roads.
  • This product is not covered under dealer warranty.
  • To achieve the full performance of this kit, please use the optional Power Flow Filter (gray, single-layer type), sold separately.
    ※ This filter is designed for race and trial use only. Do not use it on public roads.

 

 

■Related Products

Parts Product Name Code No. Remarks
 Recommended Parts TURBINE SUCTION KIT R35 14021-AN001 Power Flow, D70mm suction, D70mm Air Flow Adapter
CAPACITY UPGRADE KIT 4.3L STEP Pro BCD 21004-AN024  
CONROD BEARING ADUSTMENT VR43 STEP Pro 24998-AN004 Connecting rod bearing clearance adjustment and chamfering service 
Available only when purchased together with the 4.3L STEP Pro.
CRANK DAMPER PULLEY 24998-AN001  
CAMSHAFT+VALVE SPRING SET 22002-AN038 Individual IN/EX set
FUEL PUMP UPGRADE 14007-AN003 Set of 2, 195 L/h per unit
HIGH-FLOW SURGE TANK FULL KIT 13008-AN003 Compatible with additional injectors
INTERCOOLER KIT GT1000SPEC 13001-AN015 Part number 13002-AN004 is required for installation
INTERCOOLER FULL PIPING KIT 13002-AN004 SQV IV Included
Replacement Parts POWER FLOW GRAY SINGLE LAYER G04513-K00410-00 Please avoid using on public roads

 

 

 

Vehicle Model Engine Model Year Type Turbo Kit Turbine Size Boost Pressure Code No. Manual Remarks
GT-R R35 VR38DETT 07/12 -25/08 GT5565_BB FULL TURBINE KIT GT-FTK GT5565_BB/GT5565R_BB 88.3kPa(0.9kgf/cm2) 11003-AN019 Racing use only/Primary catalyst installation not possible

[ CLOSE ]

 

 

HKS