Code No. 14020-AN014
SPECIAL SET UP KIT GT5565_BB R35 for R35 GT-R
A kit based on the FULL TURBINE KIT with the SYMMETRY GT5565_BB turbocharger excluded.
■Features
- This product is a kit based on the FULL TURBINE KIT GT5565_BB (11003-AN019), with the SYMMETRY TURBINE GT5565_BB (14001-AK077) excluded.
- It inherits the "symmetrical layout"—a signature feature of the R35 full turbine kit—and is newly configured for the GT5565_BB setup.
- Minimal modifications to the vehicle are required, while supporting over 1000ps high-power setups.
- Heat-resistant cast steel is used for both the exhaust manifold and turbo housing, ensuring excellent durability even in high-temperature, high-vibration environments.
- A gray single-layer POWER FLOW FILTER is included in this kit
Point!
For the GT1000 and GT1000+, the setup was designed to be used together with the Racing Suction Kit (70020-AN107). However, a dedicated Suction Kit for the Full Turbine Kit (Part No: 14021-AN001) is now separately available.
Note: The Special Setup Kit does not include the D80mm–D70mm airflow adapter.
If you plan to use it in combination with the Racing Suction Kit (70020-AN107), please purchase two airflow adapters separately:
Product Name: Pipe Suction
Part Number: G17811-N49080-00
■Kit Components
| ●Component Parts | |
| Turbine | Purchase Separately (※GT5565_BB/GT5565R_BB) |
| Exhaust Manifold | Heat-resistant cast steel exhaust manifold outlet inner diameter: D47 mm |
| Wastegate | GTII D50mm |
| Front Pipe | SUS304 D70mm-D75mm |
| Suction Pipe | Aluminum buffed finish D70mm suction pipe |
| Chamber Pipe | Aluminum casting D60mm-70mm |
| Others | Replacement Engine Mount (Right Side) |
Note: Please use the SYMMETRY TURBINE GT5565_BB 3-BOLT A/R0.73 (Part No: 14001-AK077) together with this kit.
Universal-type turbos cannot be used due to differences in flange shape.
■Precautions
- This product is a kit that does not include the SYMMETRY TURBINE GT5565_BB unit or the TURBINE SUCTION KIT. If needed, please purchase SYMMETRY TURBINE GT5565_BB (Part No: 14001-AK077), TURBINE SUCTION KIT (Part No: 14021-AN001), or the SPECIAL FULL TURBINE KIT (Part No: 11003-AN020) separately.
- Engine removal is required for installation.
- The following components are not included in the kit: Fuel pump, Injectors, F-CON, EVC, Engine-related parts
- The factory-set boost pressure for the wastegate is approximately 90–100 kPa.
- Modification of the OEM water pipe and the OEM turbocharger heat insulator is required.
- This is a competition-use-only product. Therefore, we cannot guarantee against any damage to the engine, transmission, or other components resulting from installation or use.
- As this product is designed to be used without a catalytic converter, it does not comply with road safety regulations and cannot be used on public roads.
- Use of this kit may void any dealer warranty.
- To achieve optimal performance from this kit, we recommend using the Power Flow Filter (Gray, Single Layer) sold separately.
Note: This filter is designed specifically for race/trial use. It should not be used on public roads.
■Related Products
| Parts | Product Name | Code No. | Remarks |
| Recommended Parts | SYMMETERY TURBINE GT5565_BB 3BOLT A/R0.73 | 14001-AK077 | One standard rotation and one reverse rotation turbocharger included. |
| TURBINE SUCTION KIT R35 | 14021-AN001 | Power Flow, 70mm Suction ,70mm Air-flow Adapter | |
| CAPACITY UPGRADE KIT 4.3L STEP Pro BCD | 21004-AN024 | ||
| CONROD BEARING ADUSTMENT VR43 STEP Pro | 24998-AN004 | Connecting rod bearing clearance adjustment and chamfering service Available only when purchased together with the 4.3L STEP Pro. |
|
| CRANK DAMPER PULLEY | 24998-AN001 | ||
| CAMSHAFT+VALVE SPRING SET | 22002-AN038 | Individual IN/EX set | |
| FUEL PUMP UPGRADE | 14007-AN003 | Set of 2, 195 L/h per unit | |
| HIGH-FLOW SURGE TANK FULL KIT | 13008-AN003 | Compatible with additional injectors | |
| INTERCOOLER KIT GT1000SPEC | 13001-AN015 | Part number 13002-AN004 is required for installation | |
| INTERCOOLER FULL PIPING KIT | 13002-AN004 | SQV IV Inclulded | |
| Replacement Parts | POWER FLOW GRAY SINGLE LAYER | G04513-K00410-00 | Please avoid using on public roads |
| Vehicle | Model | Engine | Model Year | Type | Flange Size | Wastegate Type | Code No. | Manual | Remarks |
|---|---|---|---|---|---|---|---|---|---|
| GT-R | R35 | VR38DETT | 07/12 -25/08 | スペシャルセットアップキット | 3Bolt Φ48 | GTII Φ50 | 14020-AN014 |
|
For competition use only. First catalytic converter cannot be installed. Requires fabrication of piping such as for turbine-less setups and suction systems. |
[ CLOSE ]
