【ADDITIVE DIRET DRUG】
Organic molybdenum-based engine oil treatment to reduce friction and anti-wear for the life of your engine.
MADE IN JAPAN
■Rapid-acting organic molybdenum oil additive
- Mo-DTC, an organic molybdenum friction reducer, reduces the friction coefficient of the internal parts by 50% compared to the utilization of engine oil itself. You will experience a quieter engine noise and improved engine response immediately.
- In this product, the rapid effect is enhanced by the addition of an effect booster.
■Prevents wear and tear on Piston, Con-rods, Crank and some internal parts of the engine.
- The strong oil film created by HKS original base oil blend has a synergistic effect with the friction reducing effect of Mo-DTC and protects the engine components from wear. Especially effective for dry starts.
■Highly recommended for situations below
- If your cars mileage has increased and you are concerned about engine mechanical noise.
>>> The friction reduction effect reduces the engine noise.
- Engine overhaul carried out. >>> The anti-wear effect prevents galling of new parts.
|Stock Engine Oil (5W20)
|Engine Oil + ADD-II
The friction coefficient is reduced to less than 50% compared to engine oil without ADD-II.
The indentation after the test was also minimized thus protecting the metal surface.
■Fuel Economy Test
1.9% improvement in fuel consumption!!!
Indentation after the test
■Engine noise test at idle
Measured at 1m from the engine.
We've seen engine noise reduction of up to 3.8%!
■How to Use
- This product contains 200ml.
- Stop the engine and add 1 bottle of this product to 3-5 liters of engine oil. (Add 3-6% of ADD-II to engine oil).
- The size of the container is designed to have enough room to prevent spillage during injection.
- Engine oils with and without ADD-II were compared and using vibration analysis to test for engine parts wear.