S-Style L
ODYSSEY
ODYSSEY RA6

S-Style L

Code No. 80130-AH101

*Discontinued.

Application

Engine F23A
Model Year 99/12 - 03/10
Remarks The vehicle height data is of RA6.

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Rubber Stock
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Separated
Spring rate change at factory Possible Impossible
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)
- -
Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 675 705 ~ 637 705 ~ 644
Against stock -49 -19 ~ -87 -19 ~ -80
REAR Ride height *1 685 702 ~ 633 702 ~ 633
Against stock -37 -20 ~ -89 -20 ~ -89

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 69 ( 7 ) 92 ( 9.4 )
Free height (mm) 250 -
Spring type Straight Barrel type Special shape
Recommended range to change spring rate N/mm(kgf/mm) ±10 ( 1 ) -

Specification of damper

  F R
Damping force (Rebound/Damping)N* 873 / 235 579 / 235
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 63 / 52 88 / 82

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
334 355 329 395 411 395
Spring
Set length(mm)
233 233 250 - - - -
Length to ride hight
adjuster (mm)
51 72 29 44 53 16
Lever ratio 1.41 1.86(spg) , 1.40(dmp)

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information

  F R
Vehicle weight kg 945 691
Tire size (Air pressure) kPa 225 / 40 - 19 ( 260 ) 225 / 40 - 19 ( 260 )
Wheel size 8 JJ × 19 off 48 8 JJ × 19 off 48
Alignment
(Toe/Camber)
Test data 0 mm / -1°00' in 6 mm / -2°00'
Standard value 0 ± 2 mm / 0°00' ± 1°00' in 2 ± 2 mm / -0°30' ± 1°00'

* Test data at HKS.



Point

・We have used M shaft that was very popular for M1 series, to both front and rear damper.
・We have much improved drivability and stability by resetting the damping force and stroke distribution.
・PNE coating is used with bracket, cylinder and outer for better corrosion resistance.
・We set it to have a comfortable driving feeling for your family and friends.
・We set it to hold down the stock’s big roll and have a smooth feeling and easy steering for a fun driving.
・If you make the front case length shorter than 329mm, the upper arm and the body might interfere at a full stoke.
 
* The vehicle height data from other than the test is computational data.(The numbers does not guaranteeing the height)
 
 
 



[ CLOSE ]

 

 

HKS