MAX IV SP DRAG SUPRA
Explanation of the product Application chart

SUPRA JZA80
MAX IV SP DRAG Code No. 80250-AT002D
 
 


▲The above photo is an item for JZA80.
Return of Drag Specification Dampers. Introducing the latest technologies to suit modern drag racing requirements.


Application   Specification
Engine 2JZ-G(T)E
Model Year 93/06 - 02/07
Remarks Not compatible with the model equipped with REAS.
 
  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Spherical bearing Spherical bearing
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory
Damping force adjustment with wire - -
Helper spring
(Spring rate N/mm)
- -


Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 709 - 709 ~ 587 709 ~ 622
Against stock +17 - +17 ~ -105 +17 ~ -70
REAR Ride height *1 666 - 668 ~ 558 668 ~ 628
Against stock -2 - 0 ~ -110 0 ~ -40
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information
Spring of Full Kit
  F R
Spring rate N/mm(kgf/mm) 88 ( 9 ) 59 ( 6 )
Free height (mm) 250 300
Spring type Straight Straight Barrel type
Recommended range to change spring rate N/mm(kgf/mm) ※±10 ( 1 ) ※-
Specification of damper
  F R
Damping force (Rebound/Damping)N* 630 / 1800 4400 / 270
Default position of dial 15段 15段
Remaining damper stroke (Rebound/Damping)mm 66 / 50 46 / 90
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
411 - 411 362 354 - 356 346
Spring
Set length(mm)
245 - 245 278 - 278 299
Length to ride hight
adjuster (mm)
70 - 70 21 80 - 82 51
Lever ratio 1.78 1.31
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.


Test vehicle information
  F R
Vehicle weight kg 837 693
Tire size (Air pressure) kPa 235 / 45 - 17 ( 250 ) 275 / 40 - 17 ( 80 )
Wheel size * JJ × ** inset ** * JJ × ** inset **
Alignment
(Toe/Camber)
Test data *** mm / -*°**' *** mm / -*°**'
Standard value IN * ± * mm / -*°**' ± **' IN * ± * mm / -*°**' ± **'
* Test data at HKS.


Parts List * It may be changed without prior notice.


Point
Drag specification damper is returned with the latest technologies taking over the proven performance of HIPERMAX II DRAG damper. Setting range is dramatically improved by new spring rates and damping force specifications, and shock-body length adjustable design.
 
 
 
 
 
 
 
 
 
 


[ CLOSE ]

 

 

HKS