CONVERT KIT
GT-R
GT-R R35
Code No. 14999-AN004
CONVERT KIT GT55 for R35 GT1000
This is the water and oil piping kit required for replacing GT1000/GT1000+ with GT5565_BB
Includes a complete set of parts requiring replacement, from water and oil lines to stud bolts, nuts, and gaskets for both the compressor and turbo.
■Kit Components
| ●Main Components | |
| Water lines | Steel (partially connected to rubber hoses) |
| Oil lines | Steel |
| Gasket | Compressor Outlet Turbine Inlet and Outlet Copper Washer for Oil Piping Oil Outlet Gasket |
| Bolts and nuts | Turbine Outlet Stud Bolt & Nut |
| Others | Washer & 6mm Nipple |
Point!
We also include a set of gaskets to be replaced simultaneously during the turbine replacement.
■Features
- This set contains the parts used when customers who have installed the GT1000 or GT1000+ R35 full turbine kit upgrade to the GT5565_BB SYMMETRY TURBINE.
- Since the water and oil outlet hole positions differ between the GT1000/GT1000+ and the GT5565_BB SYMMETRY TURBINE, this product includes the necessary water and oil piping.
- Each pipe is made from bent steel tubing, allowing for easy installation without concerns about clearance, interference, or fixing points. Unlike rubber hose piping, this setup eliminates worries about heat-related deterioration.
- The set also includes gaskets for the compressor housing outlet and turbine housing inlet and outlet, so you won’t need to prepare any additional parts and can replace everything simultaneously during the turbo upgrade.
■Related Products
| Parts | Product Name | Code No. | Remarks |
| Recommended parts | SYMMETERY TURBINE GT5565_BB 3BOLT A/R0.73 | 14001-AK077 | By combining with this product, an update is possible |
| TURBINE SUCTION KIT R35 | 14021-AN001 | Power Flow, 70mm Suction, 70mm Air-flow Adapter | |
| CAPACITY UPGRADE KIT 4.3L STEP Pro BCD | 21004-AN024 | ||
| CONROD BEARING ADUSTMENT VR43 STEP Pro | 24998-AN004 | Connecting rod bearing clearance adjustment and chamfering service Available only when purchased together with the 4.3L STEP Pro. |
|
| CRANK DAMPER PULLEY | 24998-AN001 | ||
| CAMSHAFT+VALVE SPRING SET | 22002-AN038 | Individual IN/EX set | |
| FUEL PUMP UPGRADE | 14007-AN003 | Set of 2, 195 L/h per unit | |
| HIGH-FLOW SURGE TANK FULL KIT | 13008-AN003 | Compatible with additional injectors | |
| INTERCOOLER KIT GT1000SPEC | 13001-AN015 | Part number 13002-AN004 is required for installation. | |
| INTERCOOLER FULL PIPING KIT | 13002-AN004 | SQV IV Included | |
| Replacement Parts | POWER FLOW GRAY SINGLE LAYER | G04513-K00410-00 | Please avoid using on public roads |
| Vehicle | Model | Engine | Model Year | Type | Turbo Kit | Turbine Size | Boost Pressure | Code No. | Manual | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|
| GT-R | R35 | VR38DETT | 07/12 -25/08 | CONVERT KIT | - | - | - | 14999-AN004 |
|
Racing use only/Primary catalyst installation not possible |
[ CLOSE ]
