GT SYMMETRY Series
Code No. 14001-AK077
SYMMETRY TURBINE GT5565
【GT5565_BB/GT5565R_BB】
The successor to the GT1000 and GT1000+ SYMMETRY is introduced as the GT5565_BB
The compressor housing, originally designed exclusively for the R35, has been redesigned for the GT5565_BB.
It features a ported shroud that fits within an extremely tight space.
The turbo housing is made of heat-resistant cast steel to ensure durability.
■Features
- We have introduced a kit for the GT5565_BB that inherits the “Symmetry Layout” feature, a hallmark of the R35 full turbine kit. This product is the turbo unit sold separately (left and right set).
- For vehicles equipped with the GT1000 or GT1000+, turbo replacement is possible by using this product together with the conversion kit (Part No. 14999-AN004).
(Note: Water and oil piping must be replaced simultaneously.) - Compared to the GT1000 and GT1000+, a ported shroud has been added. By cleverly designing its structure to use a common suction pipe layout, surge during spool-up is avoided, improving controllability during circuit driving.
- The turbo housing uses heat-resistant cast steel, ensuring high durability against heat and vibration.
■Kit Components
| ●Component Parts | |
| Turbine | GT5565_BB (for right bank) GT5565R_BB (for left bank) |
■Turbo Specifications
| MODEL | Compressor Side | |||||
| Wheel | Housing | |||||
| Trim | Inlet Diameter (mm) |
Outer Diameter (mm) |
Inlet Diameter (mm) |
Outer Diameter (mm) |
A/R | |
| GT5565_BB GT5565R_BB |
65 | 58 | 71 | 70 | GT1000 flange | 0.74 |
| Turbo side | ||||||
| Wheel | Housing | |||||
| Trim | Outer Diameter (mm) |
Outlet Diameter (mm) |
Inlet Flange | Outlet Flange | A/R | |
| 84 | 60 | 55 | 3 Bolt | 3 Bolt | 0.73 | |
■Related Products
| Parts | Product Name | Code No. | Remarks |
| Recommended Parts | CONVERT KIT GT55 for R35 GT1000 | 14999-AN004 | By combining with this product, an update is possible. |
| TURBINE SUCTION KIT R35 | 14021-AN001 | Power Flow, 70mm suction, 70mm Air Flow Adapter | |
| CAPACITY UPGRADE KIT 4.3L STEP Pro BCD | 21004-AN024 | ||
| CONROD BEARING ADUSTMENT VR43 STEP Pro | 24998-AN004 | Connecting rod bearing clearance adjustment and chamfering service Available only when purchased together with the 4.3L STEP Pro. |
|
| CRANK DAMPER PULLEY | 24998-AN001 | ||
| CAMSHAFT+VALVE SPRING SET | 22002-AN038 | Individual IN/EX set | |
| FUEL PUMP UPGRADE | 14007-AN003 | Set of 2, 195 L/h per unit | |
| HIGH-FLOW SURGE TANK FULL KIT | 13008-AN003 | Compatible with additional injectors | |
| INTERCOOLER KIT GT1000SPEC | 13001-AN015 | Part number 13002-AN004 is required for installation | |
| INTERCOOLER FULL PIPING KIT | 13002-AN004 | SQV IV Included | |
| Replacement Parts | POWER FLOW GRAY SINGLE LAYER | G04513-K00410-00 | Please avoid using on public roads |
■Replacement Gasket
| Product Name | Code No. | Remarks |
| Gasket, Turbine Exhaust Housing | 14999-AK040 | 1 Piece |
| Gasket Turbine Outlet Pipe | 14999-AK042 | 1 Piece |
| Gasket Compressor Outlet Pipe | 14999-AK043 | 1 Piece |
| Turbine Flange Set (6 pcs) | 14999-AK039 | 2 Pieces Each |
| Product | Code No. | Manual | Remarks |
|---|---|---|---|
| GT5565_BB/GT5565R_BB | 14001-AK077 |
|
[ CLOSE ]
