Normal Page

●HKS HIPERMAX SERIES

Vehicle Model Engine Model Year Series Full Kit Spring Rate F/R Free Height Damping Force Piston Speed 0.1m/sec Damping Force N Vehicle Height (Highest - Lowest) Code No. Manual Detail Remarks
F: Rebound/Compression R: Rebound/Compression
TOYOTA
86 ZN6 FA20 12/04- MAX IV GT F=59(6) R=39(4) 170(Straight)/170(Straight) 800/260 410/150 -32(0 - -50) -31(0 - -53) 80230-KT001 Detail * To be discontinued. HKS original reinforced rubber upper mount is equipped on both front and rear sides. Modification of the rear vehicle interior is required in order to install the damping force adjustment dial.
CROWN GWS224 8GR-FXS(8GR-2NM) 18/06- MAX IV GT F=88(9)/R=98(10) 250/235(Barrel) 1059/314 726/284 -28(0 - -57) -30(+1 - -69) 80230-AT015 Detail * To be discontinued. ※After lowering the vehicle height, the irradiation range of a millimeter wave radar and monocular camera may become narrow that result in malfunction of TSSP. HKS will not be responsible for any accident caused by TSSP malfunction after installing this product.
※Modification of the rear inner fender is required.
Change front springs from 8K-250 to 9K-250.
CROWN AZSH20 A25A-1KM 18/06- MAX IV GT F=78(8)/R=98(10) 250/235(Barrel) 1059/314 726/284 -26(0 - -62) -24(+1 - -72) 80230-AT015 Detail * To be discontinued. ※After lowering the vehicle height, the irradiation range of a millimeter wave radar and monocular camera may become narrow that result in malfunction of TSSP. HKS will not be responsible for any accident caused by TSSP malfunction after installing this product.
※Modification of the rear inner fender is required.
CROWN ARS220 8AR-FTS 18/06- MAX IV GT F=78(8)/R=98(10) 250/235(Barrel) 1059/314 726/284 -28(0 - -64) -30(+1 - -88) 80230-AT015 Detail * To be discontinued. ※After lowering the vehicle height, the irradiation range of a millimeter wave radar and monocular camera may become narrow that result in malfunction of TSSP. HKS will not be responsible for any accident caused by TSSP malfunction after installing this product.
※Modification of the rear inner fender is required.
HARRIER GR SPORT ASU65W 8AR-FTS 17/09-20/05 MAX IV GT F=69(7)/R=98(10) F=200(Barrel)/R=150 650/350 650/400 F=-23(0 - -47) R=-25(0- -42) 80230-AT018G Detail * To be discontinued.
NISSAN
JUKE NISMO NF15 MR16DDT 13/02-20/06 MAX IV GT F=69(7)/R=73.5(7.5) 200(Barrel)/Special 892/324 765/363 -36(-9 - -70) -35(-25- -55) 80230-AN015N Detail * To be discontinued. Special grade for NISMO.
SERENA NISMO GFC27 MR20DD-SM24 17/11- MAX IV GT F=69(7)/R=82(8.4) 220(Barrel)/Special 892/486 368/245 -29(-3 - -50) -31(-8- -46) 80230-AN016N Detail * To be discontinued.
HONDA
CIVIC FC1 L15B 15/10- MAX IV GT F=39(4) R=39(4) 220(Barrel) /220(Barrel) 343 / 157 314 / 108 -25(-25 - -54) -29(-6 - -41) 80230-AH008 Detail * To be discontinued. Compatible with a vehicle which front knuckle’s insertion diameter is 50.5mm. Not compatible with Si grade model and a vehicle which front knuckle's insertion diameter is 52.0mm. In order to remove the stock suspension, removal of the front knuckle and hub assy is required. Installation by a professional is recommended.
CIVIC FC3 L15B 16/**- MAX IV GT F=39(4) R=39(4) 220(Barrel) /220(Barrel) 343 / 157 314 / 108 -25(-25 - -54) -29(-6 - -41) 80230-AH008 Detail * To be discontinued. Compatible with a vehicle which front knuckle’s insertion diameter is 50.5mm. Not compatible with Si grade model and a vehicle which front knuckle's insertion diameter is 52.0mm. In order to remove the stock suspension, removal of the front knuckle and hub assy is required. Installation by a professional is recommended.
CIVIC Si FC3 L15B 17/05- MAX IV GT F=39(4) R=39(4) 220(Barrel) / 220(Barrel) 343/157 314/108 -27(-17 - -48 ) -26( -1 - -36 ) 80230-KH001 Detail * To be discontinued. ※ CEL comes on if the stock suspension is removed. CEL can be canceled by a canceler available separately. Only for Civic Si Sedan and Coupe models. Not compatible with other grade models.
CIVIC Si FC1 L15B 17/05- MAX IV GT F=39(4) R=39(4) 220(Barrel) / 220(Barrel) 343/157 314/108 27(-17 - -48 ) -26( -1 - -36 ) 80230-KH001 Detail * To be discontinued. ※ CEL comes on if the stock suspension is removed. CEL can be canceled by a canceler available separately. Only for Civic Si Sedan and Coupe models. Not compatible with other grade models.
SUBARU
BRZ ZC6 FA20 12/03- MAX IV GT F=59(6) R=39(4) 170(Straight) /170(Straight) 800/260 410/150 -32(0 - -50) -31(0 - -53) 80230-KT001 Detail * To be discontinued. HKS original reinforced rubber upper mount is equipped on both front and rear sides. Modification of the rear vehicle interior is required in order to install the damping force adjustment dial.
WRX VAG FA20(TURBO) 14/**- MAX IV GT F=78(8)/R=59(6) 220(Barrel)/170 971/412 392/147 -27(0 - -55) -20(0 - -74) 80230-AF008 Detail * To be discontinued.
WRX STI VAF EJ25(TURBO) 14/**- MAX IV GT F=78(8)/R=59(6) 220(Barrel)/170 971/412 392/147 -20(0 - -48) -26(0 - -76) 80230-AF008 Detail * To be discontinued.
IMPREZA WRX GHE EJ25 07/06-14/07 MAX IV GT F=79(8)/R=59(6) 220/170 971/412 392/147 647 655 80230-KF002 Detail * To be discontinued.
INFINITI
Q50L ZV37 M274 14/11- MAX IV GT F=98(10)/R=49(5) 220/250 824/422 451/127 -39(0 - -56) 36(0 - -89) 80230-KN002 Detail * To be discontinued. Applicable only with Q50L 2.0t RWD.
Q60 CV37 VR30DDTT 15/11- MAX IV GT F=88(9)/R=49(5) 250(Straight)/250(Straight) 892/461 412/127 -25(0 - -64) -26(0 - -89) 80230-KN001 Detail * To be discontinued. Not compatible with AWD models and 2.0 turbo grade.