| Vehicle | Model | Engine | Model Year | Series | Full Kit Spring Rate F/R | Free Height | Damping Force Piston Speed 0.1m/sec Damping Force N | Vehicle Height (Highest - Lowest) | Code No. | Price | Detail | Remarks | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N/mm (kgf/mm) | F/R mm | F: Rebound/Compression | R: Rebound/Compression | FRONT | REAR | |||||||||
| TOYOTA | ||||||||||||||
| GR SUPRA | DB42 | B58 | 19/05- | Touring | F=43(4.3)/R=117(11.9) | Special/Special | - | - | -25(-25 - -48) | -20(-20 - -53) | 80280-AT001 | more
* Front bump rubber needs processing. * Packers are used when setting the front height to 24 mm or more. Not fit Grade "SZ". |
||
| GR SUPRA | DB22 | B48 | 19/05- | Touring | F=43(4.3)/R=117(11.9) | Special/Special | - | - | -16(-16 - -39) | -19(-19 - -52) | 80280-AT001 | more
* Shipped preset for RZ model (DB42/DB02). If installed on SZ-R (DB22), it is recommended to use provided testing setting data. (Vehicle height during test: F=-18, R=-19) * Front bump rubber needs processing. * Packers are used when setting the front height to 24 mm or more. Not fit Grade "SZ". |
||
| GR SUPRA | DB02 | B58 | 20/04- | Touring | F=43(4.3)/R=117(11.9) | Special/Special | - | - | -29(-29 - -52) | -24(-24 - -57) | 80280-AT001 | more • The vehicle height information comes from DB02(RZ). * Cutting of stock front bump rubber is required. * Use a special spacer when setting a thread length higher than 24 mm. * Cut the excessive length of stock front bump rubber when setting a thread length at the front set to 17 mm or less. | ||
| NISSAN | ||||||||||||||
| GT-R | R35 | VR38DETT | 13/11- | Touring | F=88(9)/R=40(4.1) | Special/Special | - | - | -11(0 - -48) | -17(-13 - -48) | 80280-AN001 | more *Compatible with after 2015 model vehicle. | ||
| BMW | ||||||||||||||
| Z4 | HF30T(G29) | B58B30B | 19/03- | Touring | F=43(4.3)/R=117(11.9) | Special/Special | - | - | -21(-21 - -44) | -19(-19 - -52) | 80280-AT001 | more
* Front bump rubber needs processing. * Packers are used when setting the front height to 24 mm or more. *Do not use this kit unless the vehicle has Adaptive M Suspension (electronic suspension). * Compatible with vehicle with Adaptive M Suspension. |
||