Vehicle | Model | Engine | Model Year | Core Size・Row | Core Location | Type | Hose Size | Aluminum Air Guide | Code No. | Manual | Detail | Remarks | |||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TOYOTA | |||||||||||||||
86 | ZN6 | FA20 | 16/08-21/10 | 200x200x32・15 | Inside right fender | S type | #10 | ○ (FRP) | 15004-AT012 |
![]() |
Detail | * Discontinued. Compatible with GT SUPERCHARGER System Pro kit, GTIII-RS Bolt On Turbo kit, GT4525 Bolt On Turbo kit, and GT4135 Bolt On Turbo Kit. Cannot be installed the fog lamp or BRZ LED accessory liner. Modifications of the radiator support and resin cover are needed. |
|||
86 | ZN6 | FA20 | 12/04-16/07 | 200x200x32・15 | Inside right fender | S type | #10 | ○ | 15004-AT011 |
![]() |
Detail | * Discontinued. Compatible with GT SUPERCHARGER System Pro kit, GTIII-RS Bolt On Turbo kit, GT4525 Bolt On Turbo kit, and GT4135 Bolt On Turbo Kit. The Applied E model (made after Aug. 2016-) and BRZ AT are not confirmed. Modifications of the radiator support and resin cover are needed. |
|||
86 | ZN6 | FA20 | 12/04-21/10 | 200x200x32・15 | In front of the radiator | S type | #10 | ○ | 15004-AT010 |
![]() |
Detail | * Discontinued. For NA, E(16/8 models and later) - Small radiator support modification is necessary. |
|||
86 | ZN6 | FA20 | 12/04-21/10 | 200x200x32・15 | In front of the radiator | S type | #10 | ○ | 15004-AT009 |
![]() |
* Discontinued. For NA - Need some work, like air conditioner pipe bending - Need separate HKS oil filter.(Stock could interfere with other parts) | ||||
86 | ZN6 | FA20 | 12/04-21/10 | 200x200x32・15 | No designated position | S type Pro | #10 | 15004-AT008 |
![]() |
* Discontinued. - The installation position must located by customer. So hose, assembly, and stay works needed. - Fitting of 45°(x1) 90°(x3) included, but might need more depending on layout. | |||||
GR YARIS | GXPA16 | G16E-GTS | 20/09-24/03 | 412×114×40・10 (turn flow) | In front of the radiator | S type | #10 | 15004-AT013 |
![]() |
Detail | * Discontinued. Standard Installation Time: 5~6 hours. Check the oil gauge and adjust the oil level to the correct level. |
||||
ARISTO | JZS161 | 2JZ-GTE | 97/08-04/12 | 200x200x32・15 | In front of radiator | S type | #10 | 15004-AT002 | * Discontinued. | ||||||
SUPRA | JZA80 | 2JZ-GTE | 93/06-02/08 | 200x220x48・15 | Inside left bumper | R type | #10 | 15004-AT003 | * Discontinued. | ||||||
CHASER | JZX100 | 1JZ-GTE | 96/09-01/06 | 200x200x32・15 | In front of radiator | R type | #10 | 15004-AT004 | * Discontinued. Not tested on Cresta. | ||||||
MARK II | JZX100 | 1JZ-GTE | 96/09-01/06 | 200x200x32・15 | In front of radiator | R type | #10 | 15004-AT004 | * Discontinued. Not tested on Cresta. | ||||||
NISSAN | |||||||||||||||
180SX | RPS13 | SR20DET | 91/01-96/08 | 200x220x48・15 | Inside right fender | R type | #10 | 15004-AN011 | * Discontinued. Not for AT. Separate washer tank required (Nissan part 27480-H1001) | ||||||
SILVIA | S15 | SR20DET | 99/01-02/08 | 200x220x48・15 | Inside right fender | R type | #10 | ○ | 15004-AN019 | * Discontinued. Not tested on AT. Modification of air form bumper's air guide is required. Not compatible with Super HICAS. Separate washer tanke required (Nissan part 27480-H1001) | |||||
SILVIA | S14 | SR20DET | 93/10-98/12 | 200x200x32・15 | In front of radiator | R type | #10 | 15004-AN013 | * Discontinued. Not compatible with Super HICAS. | ||||||
SKYLINE | ER34 | RB25DET | 98/05-00/07 | 200x200x32・15 | In front of radiator | S type | #10 | 15004-AN008 | * Discontinued. Not compatible with AT. | ||||||
SKYLINE | ECR33 | RB25DET | 93/09-98/04 | 200x200x32・15 | In front of radiator | S type | #10 | 15004-AN008 | * Discontinued. Not for AT. | ||||||
SKYLINE GT-R | BNR34 | RB26DETT | 99/01-02/08 | 200x220x48・15 | Inside left bumper | S type | #12 | ○ | 15004-AN005 | * Discontinued. | |||||
SKYLINE GT-R | BCNR33 | RB26DETT | 95/01-97/01 | 200x220x48・15 | Inside left bumper | S type | #12 | ○ | 15004-AN004 | * Discontinued. | |||||
SKYLINE GT-R | BNR32 | RB26DETT | 89/08-94/12 | 200x220x48・15 | Inside left bumper | S type | #12 | ○ | 15004-AN003 | * To be discontinued. | |||||
FAIRLADY Z (Z) | Z34 | VQ37VHR | 08/12-21/09 | 200x220x48・15 x2 | In front of radiator + inside left fender | S type | #10 | ○ | 15004-AN023 |
![]() |
* Discontinued. Twin core kit. Cooling efficiency can be improved by modifying bumper protector, however correct operation of pop up hood cannot be guaranteed | ||||
FAIRLADY Z (Z) | Z34 | VQ37VHR | 08/12-21/09 | 200x220x48・15 | In front of radiator | S type | #10 | ○ | 15004-AN024 |
![]() |
Detail | * Discontinued. Single core kit. Not fit to "Ver.NISMO". |
|||
FAIRLADY Z (Z) | Z34 | VQ37VHR | 08/12-21/09 | 200x220x48・15 | Inside left fender | S type | #10 | ○ | 15004-AN025 |
![]() |
* Discontinued. Single to twin core upgrade kit.Cooling efficiency can be improved by modifying bumper protector, however correct operation of pop up hood cannot be guaranteed. | ||||
FAIRLADY Z (Z) | Z33 | VQ35DE | 02/07-07/01 | 200x200x32・15 | Inside right fender | S type | #10 | ○ | 15004-AN022 | * Discontinued. Inner fender requires modification. Rear window washer cannot be used. | |||||
HONDA | |||||||||||||||
CIVIC TYPE R | FK8 | K20C | 17/09-22/08 | 200x122.5x48・9 | Inside right fender | S type | #10 | ○ | 15004-AH004 |
![]() |
Detail | * Discontinued. *Not compatible with vehicles equipped with Honda Sensing®. *Standard Installation Time: 4 hours *Aluminum air guide is included. |
|||
CIVIC TYPE R | EK9 | B16B | 97/07-00/08 | 200x160x32・12 | In front of radiator | S type | #10 | 15004-AH001 | * Discontinued. | ||||||
FIT | GD3 | L15A | 02/09-07/09 | 200x120x32・9 | Inside left fender | S type | #10 | 15004-AH002 | * Discontinued. Inner fender requires modification. | ||||||
MAZDA | |||||||||||||||
RX-7 | FD3S | 13B-REW | 91/12-98/12 | 200x175x48・12 | Inside L/R fenders | Factory replacement | #10 | ○ | 15004-AZ002 | * Discontinued. Twin core. For MT models. | |||||
MITSUBISHI | |||||||||||||||
LANCER EVOLUTION Ⅵ | CP9A | 4G63 | 99/01-01/01 | 200x220x48・15 | Inside left bumper | Factory replacement | #10 | 15004-AM007 | * Discontinued. | ||||||
LANCER EVOLUTION VII | CT9A | 4G63 | 01/02-03/01 | 200x220x48・15 | Inside left bumper | Factory replacement | #10 | 15004-AM008 | * Discontinued. | ||||||
LANCER EVOLUTION VIII | CT9A | 4G63 | 03/02-04/01 | 200x220x48・15 | Inside left bumper | Combine with stock | #10 | 15004-AM012 | * Discontinued. | ||||||
LANCER EVOLUTION VIII MR | CT9A | 4G63 | 04/02-05/03 | 200x220x48・15 | Inside left bumper | Combine with stock | #10 | 15004-AM012 | * Discontinued. | ||||||
LANCER EVOLUTION X | CZ4A | 4B11 | 07/10-15/09 | 200x220x48・15 | Inside right bumper | Combine with stock | #10 | ○ | 15004-AM013 | Detail | * Discontinued. Stock oil cooler bracket and oil lines require modification. Cannot be used with stock fog lamps. | ||||
SUBARU | |||||||||||||||
BRZ | ZC6 | FA20 | 16/08-21/10 | 200x200x32・15 | Inside right fender | S type | #10 | ○ (FRP) | 15004-AT012 |
![]() |
Detail | * Discontinued. Compatible with GT SUPERCHARGER System Pro kit. Cannot be installed the fog lamp or BRZ LED accessory liner. Modifications of the radiator support and resin cover are needed. |
|||
BRZ | ZC6 | FA20 | 12/03-16/07 | 200x200x32・15 | Inside right fender | S type | #10 | ○ | 15004-AT011 |
![]() |
Detail | * Discontinued. Compatible with GT SUPERCHARGER System Pro kit and GTIII-RS Bolt On Turbo kit. BRZ AT is not confirmed. Modifications of the radiator support and resin cover are needed. |
|||
BRZ | ZC6 | FA20 | 12/03-21/07 | 200x200x32・15 | No designated position | S type Pro | #10 | 15004-AT008 |
![]() |
* Discontinued. - The installation position must located by customer. So hose, assembly, and stay works needed. - Fitting of 45°(x1) 90°(x3) included, but might need more depending on layout. | |||||
BRZ | ZC6 | FA20 | 12/03-21/07 | 200x200x32・15 | In front of the radiator | S type | #10 | ○ | 15004-AT010 |
![]() |
Detail | * Discontinued. For NA.Not tested for Automatic Transmission. - Need some work, like air conditioner pipe bending. |
|||
BRZ | ZC6 | FA20 | 12/03-21/07 | 200x200x32・15 | In front of radiator | S type | #10 | ○ | 15004-AT009 |
![]() |
* Discontinued. For NA - Need some work, like air conditioner pipe bending - Need separate HKS oil filter.(Stock could interfere with other parts) | ||||
WRX STI | VAB | EJ20 | 14/08-20/04 | 200x220x48・15 | Inside right bumper | S type | #10 | ○ | 15004-AF011 |
![]() |
Detail | * Discontinued. Time Required: 6 hours. E/G Oil Reguired: 5.5l. S type Intercooler, #10 Hose size, Aluminum Air guide. EJ20 Only. |
|||
IMPREZA WRX STI | GRB | EJ20(TURBO) | 07/10-14/08 | 200x175x48・12 | Inside right bumper | S type | #10 | ○ | 15004-AF010 |
![]() |
Detail | * Discontinued. Racing Suction (available seperately) is required. Due to lack of clearance, oil pressure/temperature sendors can not be fitted. | |||
IMPREZA WRX STI | GDB | EJ207 | 05/06-06/05 | 200x200x32・12 | Inside bumper | S type | #10 | ○ | 15004-AF007 | Detail | * Discontinued. For Applied model F. Not compatible with SPEC-C. Combines with water cooled oil cooler. Due to lack of clearance, oil pressure/temperature sendors can not be fitted. Stock fog lamps cannot be used. | ||||
IMPREZA WRX STI | GDB | EJ20(TURBO) | 02/10-05/07 | 200x200x32・15 | Inside bumper | S type | #10 | ○ | 15004-AF006 | * Discontinued. For applied model C-E. Due to lack of clearance, oil pressure/temperature sendors can not be fitted. | |||||
LEGACY B4 | BL5 | EJ20X | 03/05-09/05 | 200×200×32・12 | In front of radiator | R type | #10 | 15004-AF008 | * Discontinued. For AT models. Model year code A-C | ||||||
LEGACY TOURING WAGON | BP5 | EJ20X | 03/05-09/05 | 200×200×32・12 | In front of radiator | R type | #10 | 15004-AF008 | * Discontinued. For AT models. For model year codes A-C | ||||||
SUZUKI | |||||||||||||||
SWIFT SPORT | ZC33S | K14C(TURBO) | 17/09- | 200x120x32・9 | In front of the radiator | S type | #10 | ○ | 15004-AS002 |
![]() |
Detail | * Discontinued. | |||
DAIHATSU | |||||||||||||||
COPEN | L880K | JB-DET | 02/06-12/08 | 200x120x32・9 | Inside left bumper | R type | #10 | 15004-AD001 | * Discontinued. No thermostat |